Skip to main content
Back to model

Excavators

Operation & Care Guide: SDLG E6505H

Practical guidance for safe operation, daily checks and machine care

Book a service
SDLG E6505H – Excavators

Before you start: safety first

  • Read the machine's operator manual before first use and make sure you have received certified training.
  • Wear protective equipment: helmet, safety boots, high-visibility vest and glasses where needed.
  • Always use three points of contact when climbing on or off – never jump down.
  • Fasten the seat belt before starting the engine and make sure the work area is clear of people.
  • Never carry passengers and never let anyone stand under raised parts.

Daily pre-start checks

  • Engine oil, coolant and hydraulic oil levels.
  • Air-filter condition and restriction indicator.
  • Oil or fuel leaks under and around the machine.
  • Lights, horn, reverse alarm and mirrors.
  • Drain water from the fuel water separator.
  • Track tension, rollers and teeth.
  • Boom pins and bucket bushings.

Operating tips

  • Work with the tracks square to the trench for best stability, travel motors at the rear.
  • Do not use the bucket for hammering or slewing force levelling.
  • Choose the right power mode (economy/standard/heavy) to save fuel.
  • Keep a safe distance from trench edges and power lines.

Working in Iraqi conditions

  • Clean radiators and coolers daily during summer and dust storms.
  • Let the engine idle 3–5 minutes before shutdown after heavy work.
  • Park in the shade during breaks and avoid long idling in direct sun.
  • Use clean fuel and only oils meeting approved SDLG specifications.

Periodic care schedule

Every 50 operating hours
  • Grease pivot points and pins.
Every 250 operating hours
  • Check belt tension and hose condition.
  • Check batteries and connections.
Every 500 operating hours
  • Change engine oil, oil filter and fuel filters.
Every 1000 operating hours
  • Change hydraulic filters and check transmission and axle oil.
Every 2000 operating hours
  • Change hydraulic oil and coolant per the maintenance schedule.

These are general guidelines from Darb Al-Behar and do not replace the official SDLG operator manual. Always follow the maintenance schedule for your model.

This website only uses essential local storage (e.g. to remember your language). We do not use tracking or advertising cookies. Privacy Policy