Back to model
Skid-Steer Loaders
Operation & Care Guide: SDLG SR900H
Practical guidance for safe operation, daily checks and machine care
Before you start: safety first
- Read the machine's operator manual before first use and make sure you have received certified training.
- Wear protective equipment: helmet, safety boots, high-visibility vest and glasses where needed.
- Always use three points of contact when climbing on or off – never jump down.
- Fasten the seat belt before starting the engine and make sure the work area is clear of people.
- Never carry passengers and never let anyone stand under raised parts.
Daily pre-start checks
- Engine oil, coolant and hydraulic oil levels.
- Air-filter condition and restriction indicator.
- Oil or fuel leaks under and around the machine.
- Lights, horn, reverse alarm and mirrors.
- Drain water from the fuel water separator.
- Attachment coupler lock and tyres.
- Seat bar and interlock system.
Operating tips
- Never exceed the rated operating capacity; keep the heavy end uphill on slopes.
- Travel with the load low and avoid fast turns.
- Confirm the attachment is locked before lifting.
- Exit only after lowering the arms and stopping the engine.
Working in Iraqi conditions
- Clean radiators and coolers daily during summer and dust storms.
- Let the engine idle 3–5 minutes before shutdown after heavy work.
- Park in the shade during breaks and avoid long idling in direct sun.
- Use clean fuel and only oils meeting approved SDLG specifications.
Periodic care schedule
Every 50 operating hours
- Grease pivot points and pins.
Every 250 operating hours
- Check belt tension and hose condition.
- Check batteries and connections.
Every 500 operating hours
- Change engine oil, oil filter and fuel filters.
Every 1000 operating hours
- Change hydraulic filters and check transmission and axle oil.
Every 2000 operating hours
- Change hydraulic oil and coolant per the maintenance schedule.
These are general guidelines from Darb Al-Behar and do not replace the official SDLG operator manual. Always follow the maintenance schedule for your model.